Retsch GM 200, Руководство пользователя

Страница: 6 / 60

Notes on the manual
6
1 Notes on the manual
This manual provides technical guidelines for the safe operation of the device. Read this
manual through carefully before installing, putting into service and operating the device.
Reading and understanding this manual is essential for handling the device safely and as
intended.
This manual does not contain any repair instructions. Please contact your supplier or contact
Retsch GmbH directly if anything is unclear or you have questions about these guidelines or the
device, or in the case of any faults or necessary repairs.
You can find further information about your device at
http://www.retsch.com on the pages for
the specific device concerned.
Amendment status:
The document amendment 0002 of the "Knife Mill GM 200" manual has been prepared in
accordance with the Machinery Directive 2006/42/EC.
1.1 Explanation of signs and symbols
In this document the following signs and symbols are being used:

Reference to a recommendation and/or an important information

Reference to a chapter, table or figure

Action instruction
│Name│ Software menu function
[Name]
Software button
⟨
Name
⟩
Software checkbox
1.2 Disclaimer
This manual has been prepared with great care. We reserve the right to make technical
changes. We assume no liability for personal injuries resulting from the failure to follow the
safety information and warnings in this manual. No liability will be assumed for damage to
property resulting from the failure to follow the information in this manual.
1.3 Copyright
This document or parts of it or its content may not be reproduced, distributed, edited or copied
in any form without prior written permission of Retsch GmbH. Damage claims shall be asserted
in the case of infringements.