Cleaning, Wear and Maintenance
36
8.1.1 Cleaning the machine housing
The machine is best cleaned using an industrial vacuum cleaner and brush with a long handle:
•
Clean the housing of the Jaw Crusher BB 600 with a damp cloth and standard household
detergent.
•
Ensure that no water or detergent gets inside the machine.
8.1.2 Cleaning the feed hopper and grinding chamber
WARNING
W8.0003
Serious personal injury
Contact between moving jaws in the grinding chamber
−
Accidentally reaching into the grinding chamber and between moving jaws
can cause serious injuries to hands.
•
Always operate the device with the feed hopper installed.
Fig. 12:
Feed hopper
•
Turn the Jaw Crusher BB 600
off by the main switch (H) (see “
•
Disconnect the machine from the power supply and secure to prevent it restarting.
•
Unscrew the four hex screws (S) around the feed hopper (A).
•
Lift the feed hopper (A) up and off.
•
Clean the feed hopper (A) using a damp cloth and household detergent.
•
Clean the grinding chamber and jaws with a brush and vacuum the loosened material
residue with an industrial vacuum cleaner.
•
The grinding chamber may alternatively be carefully cleaned with compressed air.
•
After cleaning, replace the feed hopper above the grinding chamber.
•
Secure the feed hopper (A) again using the four hex screws (S).
A
S
