
Important safety information
Please observe the following safety precautions when using your RetroTINK 2X.
Connect only one input at once –
Please connect only one input to your RetroTINK 2X at a time.
If you need to connect more than one device (e.g a composite and S-Video source), ensure that only
one connected device is powered on at any one time.
Use the correct power supply
– RetroTINK 2X is designed to run with a 5 volt MicroUSB power
supply unit (PSU) supplying at least 1 amp of current. Please ensure your power supply meets these
requirements. Never connect a power supply that supplies more than 5 volts. Doing so can damage
the RetroTINK 2X.
Turn off the power before connecting/disconnecting equipment
– To prevent damage of the
RetroTINKs integrated circuits, always turn off the power before connecting to a display or a
device.
Be careful when connecting and disconnecting cables
– Do not apply excessive force especially
to the USB or HDMI output connectors. When using MiniHDMI to HDMI adapters, be careful not
to bend the socket or apply excessive pressure to the connectors.
Do not expose to moisture
– Droplets of moisture may contact the PCB and cause a short circuit.
Never submerge the unit in water.
Keep away from fire or high heat sources
– RetroTINK 2X is not flammable but high
temperatures, such as those from a fire or electric heater may melt the plastic casing.
Please supervise children
– RetroTINK 2X is not a toy and is not designed for use by children.
Please supervise children if they use the RetroTINK 2X.
Beware of using the RetroTINK 2Xs deinterlacer on sources that display static graphics or
text for a long period of time –
RetroTINKs deinterlacer produces a constant flickering effect.
This can cause image retention/burn-in to occur faster than normal. See page 6 for more
information.