1.
Open Frame Quick Release Lever by pulling it away from the scooter
(Fig. 2)
.
2.
Slide/pull Slide Lever upward/toward the front of scooter while rotating the handlebar
assembly away from the deck. Release the Slide Lever and handlebar assembly will lock into
place. You will hear a click as it locks into place
(Fig. 3)
.
3.
Lock close the Frame Quick Release Lever against the scooter frame (
Fig. 4)
.
The lever should begin to offer resistance at about the half way point in its travel. The lever
should require some force to close. If it closes too easily, or if the effort to close the clamp is too
great, adjust the clamping force by loosening or tightening the adjusting nut on the side
opposite the lever.
STEP 1: UNFOLDING THE SCOOTER
UNFOLDING & ADJUSTING YOUR SCOOTER
Fig. 1
Carton Contents:
Scooter | Owner’s Manual
Fig. 2
Fig. 3
Fig. 4
WARNING:
Keep fingers clear of the pivoting mechanism when folding/unfolding the scooter.
GRIPS
T-BAR
COLLAR
CLAMP
HANDLEBAR
QUICK RELEASE
FRAME FOLDING
QUICK RELEASE
BRAKE
DECK
SLIDE LEVER
OPEN
SLIDE
LEVER
CLOSE/LOCK
