1 ¼” RECEIVER:
1.
Rack is factory-ready for installation into 1 ¼” (Class II) vehicle hitch receiver.
2.
Align and insert 1-Hole Anti-Rattle Threaded Plug to large hole at end of
Hitch Tongue (similar to STEP 2)
(Fig. 8)
.
2” RECEIVER:
1.
Align and install 2” length x 6mm hex head Flush-Mount Bolt through 2” Adapter Sleeve into
smaller/second hole from end of the Hitch Tongue. Tighten firmly
(Figs. 9 & 10)
.
2.
Align and insert 1-Hole Anti-Rattle Threaded Plug to large hole at end of Hitch Tongue
(similar to STEP 2)
(Fig. 10)
.
STEP 4: RECEIVER ADAPTER
Fig. 8
Fig. 9
Fig. 10
1.
With 1-Hole Anti-Rattle Threaded Plug installed and aligned, insert rack onto vehicle by sliding the Hitch Tongue into the hitch receiver
(Fig. 11)
.
2.
Insert 3 ½” half-thread Anti-Rattle Hitch Bolt (19mm) with lock washer into receiver and tongue and tighten securely
(Fig. 12)
.
3.
Insert Hairpin Cotter Pin through hole on other side of hitch bolt
(Fig. 13)
.
Fig. 11
Fig. 12
Fig. 13
STEP 5: RACK ON VEHICLE
Hitch Tongue 1 1/4”
Hitch Tongue 1 1/4”
Align to this hole
1-Hole Anti-Rattle
Threaded Plug
Align to this hole
2” Adapter Sleeve
6mm Flush-Mount
Bolt
Align to this hole
1-Hole Anti-Rattle
Threaded Plug
Insert and align
Vehicle Hitch
Receiver (2”)
Hairpin Cotter Pin
Hitch Tongue 1 1/4”
2” Receiver Adapter
3 1/2” half-threaded
Anti-Rattle Hitch Bolt
