Fig. 6
STEP 2: REAR WHEELS
Tools: 2, 5mm hex wrenches
1.
Make sure both Frame Axle Covers are installed.
2.
Remove the 5mm Bolt & Flat Washer
from one side
of the Axle.
a.
Insert the Axle through one rear wheel, through the Frame Axle Cover,
and through the Frame.
b.
Slide the other wheel onto the Axle, then the Flat Washer, insert 5mm
Bolt
(Fig. 5)
. Wheels are interchangeable.
3.
Tighten securely using the 2, 5mm hex wrenches
(Fig. 6)
.
1.
Insert Front Fork Assembly into Frame Steering Tube from the bottom-up
(Fig. 7)
.
2.
Slide Collar Clamp onto Front Fork
(Fig. 7).
Fig. 7
STEP 3: FRONT FORK & WHEEL ASSEMBLY
Fig. 5
COLLAR
CLAMP
FRAME
STEERING
TUBE
FORK
TUBE
FRONT
FORK
ASSEMBLY
AXLE BOLT 5mm
WASHER
AXLE
FRAME
WHEELS
FRAME
AXLE COVERS
TIGHTEN
(CLOCKWISE)