RetroBelt Tri Five, Руководство по установке, Страница: 9 / 18

8
Copyright 2015 RetroBelt USA, LLC
INSTALLATION GUIDELINES
Option 2
Another way to install the anchor point is to use a power saw
to open the side of the B pillar behind where you marked your
mounting point. Insert the anchor mount between the medal of
the B pillar, and use clamps to hold the plate in place. Drill a 7/16”
hole to allow mounting of the anchor mount to the B pillar
(See Figure 4), then remove the clamps.
Figure 4
Grade 5 anchor mount
Cut a slit into the B pillar
B pillar
Place the anchor mount
Into the B pillar
Use clamps to secure
the anchor mount,
bolt it down then
remove the clamps
Install the Anchor Mounts to the Floor
Using the templates you made with the felt-tipped marker, drill a
hole in the correct location for the second and third anchor points.
Secure the anchor mounts beneath the floor pan using the bolts
provided (See Figure 5) or by welding (use the same method as
above if you choose to weld your anchor point).
Figure 5
Secure the anchor mount
beneath the floor pan
Anchor mount
Floor pan