manualshive.com logo in svg

Retroaktiv MPG-50, Руководство пользователя

Поделиться
Скачать
Retroaktiv MPG-50 Скачать руководство пользователя страница 10

RETROAKTIV MPG-50 USER MANUAL

10

USING ENCODER TO SCROLL TH ROUGH PRESETS ON SYNTH

USING ENCODER TO SCROLL TH ROUGH PRESETS ON SYNTH

MPG-50 allows users to use the encoder to scroll through presets on the MKS/Juno.  To do this, press MAIN 
button to return to the MAIN screen, and press the LEFT button once.  This will navigate to the MAIN: Preset 

MAIN: Preset 

Select 

Select menu.  Scrolling through the PRESET SELECT menu will allow you to scroll through the sounds on the 
MKS/Juno usit using the encoder on the MPG-50.  

MAN UAL MODE

MAN UAL MODE

To send the current slider and button settings on the front panel to the synth,  go to the MAIN menu by 
pressing [MAIN].  Now press [SHIFT] + [ENTER].  A dialog box will pop up, reading “Sending all control positions”.

PATCH M EN U

PATCH M EN U

The Alpha Juno and MKS-50 each have a PATCH MENU, which contains the settings for the synth which are not 
accessible from the front panel sliders.  To navigate to the PATCH PARAMS menu, press MAIN to return to the 
MAIN screen, and press the RIGHT button.  The PATCH PARAMS menu will be displayed based on which type of 
unit (MKS or JUNO) the currently selected layer is set to.  

Alpha Juno PATCH PARAMS menu contains:

• •  Key Mode 

Key Mode - Mono/Poly/Chord (These can also be toggled using SHIFT+GLIDE)

• •  Bend Rng 

Bend Rng - Sets Alpha Juno bend range

MKS-50 PATCH PARAMS menu contains:

• •  Key Mode 

Key Mode - Mono/Poly/Chord (These can also be toggled using SHIFT+GLIDE)

• •  Key Shift 

Key Shift - Transposes MKS-50 by half-steps

• •  Key Range Low 

Key Range Low - Sets lowest note on MKS-50

• •  Key Range High 

Key Range High - Sets highest note on MKS-50

• •  Volume

Volume- Sets MIDI volume of MKS-50

• •  Tune 

Tune - Fine tuning of MKS-50

• •  Mod Sens 

Mod Sens - Sets mod wheel sensitivity

• •  Bend

Bend- Sets pitch wheel sensitivity

• •  Chord Mem 

Chord Mem - Selects the MKS-50 CHORD from MKS-50 memory

• •  Vol

Vol- enables volume messages on MKS

• •  Port

Port- Enables GLIDE on MKS

• •  Mod 

Mod - Enables Mod Whl on MKS

• •  Hold 

Hold - Enables Sustain Ped on MKS

• •  Bend

Bend- Enables Pitch Whl on MKS

• •  Aftertouch 

Aftertouch - Enables aftertouch on MKS

Содержание MPG-50































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды