RETRO EMRX, Руководство пользователя, Страница: 14 / 16

This device complies with part 15 of the FCC rules. Operation is subject to the following two (2) conditions:
(1)
This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different to that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
FCC COMPLIANCE STATEMENT
ELECTRICAL GROUNDING
AQUA/LAMP® is registered trademark of Consolidated Pool & Spa Industries Inc Canada.
Spa Electrics Export Pty Ltd Australia and it’s ATOM and RETRO brands are not affiliated or endorsed by these companies and/or their brands.
Underwriters Laboratories (UL) Statement
Per the NEC, NFPA 70, Article 680.23 (B)(5), states that bonding shall not be required
for luminaires that are listed for the application and have no non-current carrying metal
parts. In addition, per Article 680.26 (B)(4), exception states that Listed low-voltage
lighting systems with non-metallic forming shells shall not require bonding.
Therefore, luminaires with polymeric/non-current carrying metal parts
are not required to be grounded / bonded.
Manufacturers Statement
Spa Electrics ATOM & QUANTUM (EM & WN9) luminaires with their plastic housing
designs and plastic niches do not require grounding / bonding.
Spa Electrics ATOM & QUANTUM (EM & WN9) lights have also been determined
to comply with the applicable requirements for wet-niche, LED type Swimming Pool
and Spa Luminaires.
13