background image

23 

15 

30 

Included mounting bases

FIGURE 1

Adjustable 

Mounting Base

Metal 

Retainer Cup

Mounting Nut

Antenna Mast

Angle Base

Underside

of Fender

Antenna Input 

From Radio

Motor Assembly

Drain Tube

Mounting Hole

Wiring to Radio

Metal Strap

FIGURE 2

Model shown above: PA-01 / PA-03

FIGURE 3

Black (-) to chassis 

ground from antenna

Red (b12 volt) 

wire from antenna

Blue switched wire 

to antenna lead

Coaxial cable 

from antenna

Antenna input

5 amp fuse 

to red wire

Radio

Fuseblock

Fuseblock

Switched

Switched wire 

from radio

Ignition switch

Unswitched

PA-03

PA-01

Battery

Replacement Antenna Masts

Replacement antenna masts are available. 
To purchase a replacement mast, call us at 
702.483.2222 or visit our website: 
www.retromanufacturing.com.

Содержание PA-01

Страница 1: ...one is needed 1 Removing the Old Antenna a Disconnect the battery before you begin Gain access to the underside of the fender area through the trunk fender splash panel etc b Remove and disassemble the old antenna and base Retain the old base and mounting parts for your reference In some cases you can reuse them if you wish to keep the old look Remove the mounting bracket drain tube electrical wir...

Страница 2: ...ide of the fender tighten the mounting nut firmly to secure the antenna assembly Do not over tighten the nut Over tightening the nut may strip or break the mounting threads or damage the contact spring causing improper antenna operation i Attach the drain tube to the bottom of the motor assembly and route it to the outside of the car Avoid kinking or bending the drain tube see Figure 2 j Route the...

Страница 3: ...PA 01 PA 03 FIGURE 3 Black to chassis ground from antenna Red battery 12 volt wire from antenna Blue switched wire to antenna lead Coaxial cable from antenna Antenna input 5 amp fuse to red wire Radio Fuseblock Fuseblock Switched Switched wire from radio Ignition switch Unswitched PA 03 PA 01 Battery Replacement Antenna Masts Replacement antenna masts are available To purchase a replacement mast c...

Страница 4: ...shed product The decision to repair or replace will be made by the warrantor To handle warranty issues contact us at tech retromanufacturing com or call 702 483 2222 All returns and warranty issues must be accompanied by a Return Authorization RA number along with a copy of your original purchase receipt Any items sent to us without a RA number and copy of the receipt will be refused Once an RA nu...

Отзывы: