6
SIDE-KICK REMOTE LAUNCHER
OPERATING INSTRUCTIONS
WARRANTY
The Side-Kick Remote Launcher is guaranteed for 1 year from the date of purchase to be free of
manufacturer defects. This guarantee is void if other than the recommended power charges are used
or if the product is not used in conformance with these instructions. RRT dummies are guaranteed for
a period of 1 year from the date of purchase to be free of manufacturer defects.
If you do not understand the instructions or have further questions regarding the use and
operation of the Side-Kick Remote Launcher please discontinue use and contact Specialty
Products Company USA at (570) 729-7192 with your questions.
User must throughly clean the barrel, chamber and hinge areas with a good gun cleaning solvent
after each use of each RRT Launcher used in the Side-Kick Remote Launcher Unit. Before each
use examine your Side-Kick Remote Launcher Unit and RRT Launchers to ensure there is no
debris and no damage to the equipment. Improper maintenance and failure to properly clean
>>
MAINTENANCE
the RRT Launchers and Side-Kick Remote Launch Unit may
result in serious injury or death.
User is responsible to evaluate the entire unit before
every launch to ensure all fittings are secure and full
functioning.
You may purchase the Retriev-R-Trainer Cleaning Kit at any
of our retailers listed on our website at
www.rrtlauncher.com
.
A small amount of gun oil applied to the hinge area after
cleaning will help to ensure smooth operation. Cleaning of the
chamber can be enhanced by using a .22 caliber wire brush.
Also thoroughly clean and dry the inside of the aluminum
dummy tube after each launch. Be certain that prior to each time you launch the dummy from
your Side-Kick Remote Launcher that it is free of debris both internally and externally. Failure
to properly maintain the aluminum insert tube in your dummy may result in serious injury
or death.
A rubber “O” Ring in a groove near the outer end of the barrel provides a seal for the release
gases from the power charge. This “O” Ring will wear, causing some of the gases to escape,
thereby reducing the flight distance of the dummy.
Apply a thin coat of Vaseline, or any other lubricant safe for use on rubber components, to
prevent drying and cracking of the “O” Ring. Replacement “O” Rings are available from our
retailers on our website.
