3
RRT LAUNCHER OPERATING INSTRUCTIONS
1) Assemble the “T” portion of the stock onto the Lucky Launcher II. Refer to
diagram on page 4 for the location of the handle. You MUST be sure that the
handle is fully seated and the silver depression tab is fully locked into the drilled
hole position. NEVER FIRE/LAUNCH WITH OUT THE SHOULDER STOCK
EXTENSION FULLY ASSEMBLED. Failure to properly assemble the shoulder
stock extension may result in serious injury or death.
2) Slide the launcher dummy onto the Lucky Launcher II barrel.
3) Open the breech by depressing the thumb latch and tip the barrel assembly
down to gain access to the chamber.
4) Insert a .22 caliber blank cartridge into the chamber. Make certain the cartridge
is fully seated.
5) Close the breech of the unit and press the thumb latch in to assure it is fully
closed and locked.
7) Pull back the bolt to the locked position.
9) To remove the spent cartridge, depress the thumb latch and tip the barrel
assembly down to gain access to the extracted shell casing. The extractor will
not eject the shell but raise it enough to be easily removed.
10) Always remove the blank power charges and dummy from the barrel when
not in use.
>>
PREPARATION FOR FIRING
>>
NOTE :
NEVER DRY FIRE YOUR LUCKY
LAUNCHER II
