RET1025
Retina Vandal Proof IR Dome Camera
with SONY High Resolution CCD Sensor
USER MANUAL
SPECIFICATIONS
Model
RET1025
Pick Up Element
SONY 1/3¨ CCD
Effective Picture Elements (H*V)
NTSC: 510x492 PAL: 500x582
Horizontal Resolution
420 TV Lines
S/N Ratio
>48dB
Clock Frequency (MHz)
NTSC: 19.0699 PAL: 18.9375
Scanning System
2:1 Interface
Minimum Illumination
0 Lux (with IR LED ON)
Synchronous System
Internal, Negative sync.
Auto Electronic Shutter
NTSC: 1/60~1/100,000 PAL: 1/50~1/100,000
Gama Characteristic
0.45
IR Distance
20m (with 24 Unit Infrared LED)
IR Status
<10 Lux by CDS
IR Power On
CDS Auto Control
Video Output
1 Vpp, 75 Ohm
Auto Gain Control
Auto
Power/Current
12V DC (±10%) / 300mA
Lens
3.6 mm / F 2.0 (optional: f 2.5/6.0/8.0)
Water Resistance
N/A
Dimensions
ø3.7¨ x 2.7¨(H) mm
Weight
0.9 lbs
Storage Temperature
-30~+60˚C
Operating Temperature
-10~+45˚C
TROUBLESHOOTING
1.
No picture after providing power.
Possible power supply voltage abnormality. Check for proper power supply voltage
and polarity. Ensure that all the connecting cables and monitors are hooked up
properly.
2.
Interference (hum bars) are moving through the picture.
Check the monitor and peripheral equipment used.
3.
The picture background changes color continuously.
The fluorescent light’s electromagnetic field can cause color roll. This is a normal
phenomenon. Reduce the number of fluorescent lights, or increase the distance
between the camera and the fluorescent lights.
4.
The picture quality is poor or “fuzzy”
This is usually due to poor quality cables or poor connections. Ensure that all the
connecting cables and monitors are hooked up properly, or switch to higher quality
connecting cables.
LIMITED WARRANTY
This warranty remains in effect for one year from the date of purchase. Except as speci-
fied below, this warranty covers all defects in material and workmanship. The following
are not covered: Damaged caused by accident, misuse, abuse, product modification or
neglect, damage occurring during shipment, damage from failure to follow instructions
contained in the owner’s instruction booklet, damage resulting from the performance of
repairs by someone not authorized by Retina Security Equipment, or any claims based on
misrepresentations by the seller. This warranty does not cover incidental or consequen-
tial damages. It does not cover the cost of removing or reinstalling the unit. This warranty
is void if the serial number has been removed or defaced.
This warranty gives you specific legal rights. You may also have other rights which vary
from state to state. Some states do not allow the exclusion or limitations of incidental or
consequential damages or limitation on how long an implied warranty lasts so the above
may not apply to you.
HOW TO OBTAIN SERVICE
Please call us at (800) 844-9555 Monday – Friday 8am – 5pm. Central Standard Time.
We may direct you to an authorized dealer/technician or request that you return the prod-
uct for repair. You must present the original bill of sale to establish the date of purchase.
Please do not ship your product to us for repair without prior authorization. You are
responsible for transportation of your product and payment of any shipping charges. If
the repairs are covered under warranty, we will pay the return shipping charges.
NOTE:
Do not attempt to disassemble the camera. Doing so may void your warranty. No
user-serviceable parts inside.
