w lien \ ou finish speaking, release PTT (press to talk, release l<> listen)
Youi radio has multiple channels shared on a "lake turn basis. For
uninterrupted communication, do not talk on a channel if someone else is
current 1\ talking on it
To check for activity on a channel before you talk, press and hold JVM O N
If you hear static, the channel is clear to use
Interference Eliminator Code
Interference lTiminator Codes help minimize interference by providing you
with a choice of code combinations. To set the code for a channel:
1. Press O until the code starts to flash.
2. Press UP or D O W N to select the code 0-121 OR 121 -0.
3. Press PTT to save the code setting.
You can set a different code for each channel using this procedure.
Note:
You must set the Interference Eliminator Code to 0 on an FRS radio
that uses Interference Eliminator Codes to communicate with other F R S
radios that do not have Interference Eliminator Codes.
To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press PTT for 180
continuous seconds.
Page 4
