1) Under VFO mode, long press [ ], the digit blinks at the right top of LCD.
2) Press [ ] or [ ] or input channel number you want to delete, then press [ ] to confirm.
3) After delete, it will skip into next channel, if you want to delete it,repeat above operation.
5)FM RADIO FUNCTION
1) On/off radio receiver
Under standby mode, press [ ] to open FM radio function, LCDdisplay “70.00M”, then press [ ] again, radios receiver is off.
Note: under FM radio mode, if receiving the signal, the radio will be out of FM mode, after 5S, it will be back to
FM mode when the signals disappear.
2) Mode selection:
Under FM radio mode, press [ ] to switch between FM memory mode and FM frequency mode (this function is unavailable when
there is not FM memory channel)
3) Frequency selecting
Under FM frequency mode, input the digits directly by keypad or press [ ] or [ ] to choose the desired frequency. Under FM
memory mode, press [ ] or [ ] to choose the desired channel.
4) FM radio storage
Under FM frequency mode, long press [ ], the channel number for storage blinks at the right of the screen.Press [ ] or [ ] to
select the desired channel number, press [ ] to confirm and then back to the receiving mode.
5) FM radio channel delete:
Under FM frequency mode, long press [ ], the channel number blinks, press [ ] or [ ] to choose the channel number you want
to delete, Press [ ] to confirm. Repeat this operation, you can delete all memory channel 24 in maximum.
1)EMERGENCY ALERT [ ] + [ ]
Under standby mode, press [ ] to enter menu setting. LCD display “MENU”, then press [ ] to turn on emergency
alert function, radio will transmit emergency ring for 20S and then receive for 10s, until you press PTT, it will exit.
2)KEYPAD LOCK SETTING
Under standby mode, press [ ] for 2 S to lock to unlock the keypad. “ ”will be displayed at the top of LCD when keypad is locked.
And you can Enter Menu 32 [LOCK MD] to set Keypad lock method:
ALL/PTT/KEY/KEY+S lock.
3)TONE CALLING (1750 TONE)
To access a repeater, press and hold in [Side key 1] for the amount of time specified by the repeater. The transmitter will automatically be
activated, and a 1750Hz audio tone will be superimposed on the carrier. Once access to the repeater has been gained, you may release
[Side key 1] and use PTT for activating the transmission.
4)CHANNEL STORAGE AND DELETE
Channel Storage
ADVANCED FUNCTIONS
th
Under VFO mode, input desired frequency by keypad directly or select one by pressing [ ] or [ ] and then long press [ ] , the
digits blinks at the right top of LCD, press number to input desired channel directly, or press [ ] or [ ] to choose desired one, then
press [ ] for storage.
1) Under VFO mode, input 4-5-0-3-2-5
2) Press [ ]+[ ][ ] or press [ ] +[ ],then press [ ] to enter.
3) Press [ ] to choose CTCSS mode, LCD displays C-CDC 67.0
4) Press [ ] or [ ] to choose 151.4, then press [ ] to confirm
5)Press [ ] to exit
6)Long press [ ], the digit blinks at the right top of LCD
7)Press [ ] or [ ] to choose 05 directly
8)Press[ ] for storage. LCD displays MR mode and currently stored channel
Note:
after you input desired channel number, if it blinks, it means that this channel is already occupied,you can choose another one.
e.g.: to store the frequency: 450.325MHz with CTCSS: 151.4 to the channel 05, the step are as follows:
Channel delete
12
