suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectriq-ue subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
RF Exposure Information
• DO NOT operate the radio without a proper antenna attached, as this may damage the radio
and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied
with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for
use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer
declared.
• DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can
cause RF exposure compliance requirem-ents to be exceeded.
• During transmissions, your radio generates RF energy that can possibly cause interference with
other devices or systems. To avoid such interference, turn off the radio in areas where signs are
posted to do so.
• DO NOT operate the transmitter in areas that are sensitive to elect-romagnetic radiation such
as hospitals, aircraft, and blasting sites.
• Portable Device, this transmitter may operate with the antenna(s) documented in this filing in
Push-to-Talk and body-worn configurat-ions. RF exposure compliance is limited to the specific
belt-clip and accessory configurations as documented in this filing and the separation distance
between user and the device or its antenna shall be at least 2.5 cm.
• Mobile Device, during operation, the separation distance between user and the antenna
subjects to actual regulations, this separation distance will ensure that there is sufficient distance
from a properly installed externally-mounted antenna to satisfy the RF exposure requirements.
• Occupational/Controlled Radio, this radio is designed for and classi-fied as
“Occupational/Controlled Use Only”, meaning it must be used only during the course of
employment by individuals aware of the hazards, and the ways to minimize such hazards; NOT
intended for use in a General population/uncontrolled environment.
• General population/uncontrolled Radio, this radio is designed for and classified as “General
population/uncontrolled Use”.
RF Exposure Compliance and Control Guidelines and Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled environment
exposure limits, always adhere to the following procedures.
Guidelines:
• User awareness instructions should accompany the device when transferred to other users.
• Do not use this device if the operational requirements described herein are not met.
Operating Instructions:
• Transmit no more than the rated duty factor of 50% of the time. To Transmit (Talk), push the
Push to Talk (PTT) button. To receive calls(listen), release the PTT button. Transmitting 50% of
the time, or less,is important because the radio generates measurable RFenergy exposure only
when transmitting in terms of measuring for standards compliance.
• Transmit only when people outside the vehicle are at least the reco-mmended minimum lateral
distance away from a properly installed according to installation instructions, externally mounted
antenna.
• When operating in front of the face, worn on the body, always place the radio in a Retevis
approved clip, holder, holster, case, or body harness for this product. Using approved body-worn
accessories is important because the use of Non-Retevis approved accessories may result in
07
