6. WORKING THE MENU SYSTEM
6.1 Basic use
Using the menu with arrow keys
1> Press the [MENU] key to enter the menu.
2> Use the [+UP] and [-DOWN] keys to navigate between menu items.
3>Once you find the desired menu item, press [MENU] again to select that menu item.
4>Use the [+UP] and [-DOWN] keys to select the desired parameter.
5>When you've selected the parameter you want to set for a given menu item;
a). To confirm your selection, press [MENU] and it will save your setting and bring you back to
the main menu.
b). To cancel your changes, press [A/B] and it will reset that menu item and bring you out of the
menu entirely.
6> To exit out of the menu at any time, press the [A/B] key
6.2 Menu settings
6.2.1 Receiving with Privacy Codes (RXCODE) - MENU 01
You can configure different Receiving Privacy Codes for each channel. The selected Privacy
Code may be different for each channel.
Note: Selecting a Privacy Code of "OFF" will disable the Privacy feature. To communicate
between two radios, all radios in your group must be set to the same channel and Privacy Code
selections.
The Receiving Privacy Codes setting steps are as follows:
1> Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU
01.
2> Press [MENU] key again to enter the RXCODE menu;
3> Press [+UP]/[-DOWN] key to select the Privacy Code, and the selection range is OFF /
67.0~754N.
Note:
The state of the Privacy Code is off, and the display is OFF. When the display is OFF,
press the [+UP] key to select CTCSS with priority, range 67~254.1Hz (50 groups in total); when
the display is OFF, press the [-DOWN] key to select DCS with priority, range D754I-023N (104
groups in total).
During the selection process, Pressing and holding the [+UP]/[-DOWN] key to quickly search for
the sub-tone code.
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.2.2 Transmitting with Privacy Codes (TXCODE) --- MENU 02
You can configure different transmission Privacy Codes for each channel. The selected Privacy
Code may be different for each channel.
Note:
Selecting a Privacy Code of "OFF" will disable the Privacy feature. To communicate
between two radios, all radios in your group must be set to the same channel and Privacy Code
selections.
The transmission Privacy Codes setting steps are as follows:
1> Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU
02.
2> Press [MENU] key again to enter the TXCODE menu;
3> Press [+UP]/[-DOWN] key to select the Privacy Code, and the selection range is OFF /
67.0~754N.
Note:
The state of the Privacy Code is off, and the display is OFF. When the display is OFF,
press the [+UP] key to select CTCSS with priority, range 67~254.1Hz (50 groups in total); when t
7
