Retell 332 clip, Руководство по эксплуатации

Страница: 34 / 44

Appendix
34
Problem Possible cause Solution / recommendation
No telephone number is being
displayed for an incoming call. Your telecommunications
provider or telephone system
does not support this function
or the function is not released.
The caller has restricted the
presentation of his telephone
number or has a secret
number.
The call comes from a public
telephone.
The call comes via a telephone
network that does not support
the transfer of the caller's
telephone number.
Ask your telecommunications
provider or your telephone
system manufacturer whether
the function is possible or
needs to be released.
Factory pre-set
In the following table, you can see the factory pre-set parameters or values for your
Retell 332 clip. You can change all these parameters individually. You can easily
reset the device to the factory pre-set parameters via the “set-up menu”.
Language (D)
Recording length 2 minutes
Recording quality (maximum) 2
Number of ringing tones until call pick-up 2
Remote control code -
Remote pre-interrogation no
Message code -
Exchange identification code (telephone systems) -
Display contrast (medium) 8
Message transfer off
Destination number for message transfer -
Outgoing message 4 (pre-recorded)
Answering mode off