After the driver is successfully installed, open the configuration
tool (Figure 5)
Configuration steps
1.Put the Trigger on the Tag Writer
2.Select the correct port
3.Click “Connect”
4.Write ID--which assigned to the attraction (8 bytes)
Set Range--Set the transmission range of the Trigger
Set Cycle--Set the number of send per second of Trigger
(Used to control the power consumption of the Trigger)
Read All--Read all the data of the Trigger
Clear-- Clear all the data in the display box
5.There is a text prompt when the operation is successful.
(Figure 3)
(Figure 4)
(Figure 5)
