Voltage
Frequency Range
Antenna
Speaker
Max no-distortion output
Max consume power
Dimensions
Weight
Accessories
DC:4.5V(UM-1×3
）
AM:520-1710KHZ
FM:87-108MHKZ
SW
AM: inner magnetic rod antenna
FM/SW:Rod antenna
3
.5 inch,6Ω
1.3W
3W
212X137X64 MM
About 0.87kg (Batteries are not include
）
AC power cord
Tech Specifications
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
Before using this radio, read this guide which contains
important operating instructions for safe usage and RF
energy awareness and control for compliance with
applicable standards and regulations.
ATTENTION!
Local Government Regulations
When radios are used as a consequence of employment, the Local
Government Regulations requires users to be fully aware of and able to
control their exposure to meet occupational requirements. Exposure
awareness can be facilitated by the use of a product label directing users to
specific user awareness information. Your Retekess radio has a RF Exposure
Product Label. Also, your Retekess user manual, or separate safety booklet
includes information and operating instructions required to control your RF
exposure and to satisfy compliance requirements.
Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible for
compliance may void the user’s authority granted by the local government
radio management departments to operate this radio and should not be made.
To comply with the corresponding requirements, transmitter adjustments
should be made only by or under the supervision of a person certified as
technically qualified to perform transmitter maintenance and repairs in the
private land mobile and fixed services as certified by an organization
representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not
authorized by the local government radio management departments
equipment authorization for this radio could violate the rules.
FCC Requirements:
•This device complies with part 15 of the FCC Rules. Operation
is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
•This equipment has been tested and found to comply with the li
mits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
•(Simple EU declaration of conformity) Henan Eshow Electronic C
ommerce
Co.,Ltd declares that the radio equipment type is in compliance with the
essential requirements and other relevant provisions of RED Directive
2014/53/EU and the ROHS Directive 20
11/65/EU and the WEEE Directive
2012/19/EU; the full text of the EU declaration of conformity is available at the
following internet address: www.retekess.com.
•Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging
reminds you that in the European Union, all electrical and electronic products,
batteries, and accumulators (rechargeable batteries) must be taken to
designated collection locations at the end of their working life. Do not dispose
of these products as unsorted municipal waste. Dispose of them according to
3
4
AC:110V 60Hz or AC:220 50Hz
:6-18MHZ
