Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect your hearing:
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before adding headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• When using the radio without a headset or earpiece, do not place the
radio's speaker directly against your ear
• Use careful with the earphone maybe possible excessive sound pr-
essure from earphones and headphones can cause hearing loss
Note: Exposure to loud noises from any source for extended periods of time
may temporarily or permanently affect your hearing. The louder the radio's
volume, the less time is required before your hearing could be affected.
Hearing damage from loud noise is sometimes undetectable at first and
can have a cumulative effect.
Avoid Burns
Antennas
• Do not use any portable radio that has a damaged antenna. If a damaged
antenna comes into contact with the skin when the radio is in use, a minor
burn can result.
Batteries (If appropriate)
• When the conductive material such as jewelry, keys or chains touch
exposed terminals of the batteries, may complete an electrical circuit
(short circuit the battery) and become hot to cause bodily injury such as
burns. Exercise care in handling any battery, particularly when placing it
inside a pocket, purse or other container with metal objects
Long transmission
• When the transceiver is used for long transmissions, the radiator and
chassis will become hot.
Safety Operation
Forbid
• Do not use charger outdoors or in moist environments, use only in dry
locations/conditions.
• Do not disassemble the charger, that may result in risk of electrical shock
or fire.
• Do not operate the charger if it has been broken or damaged in any way.
• Do not place a portable radio in the area over an air bag or in the air bag
deployment area. The radio may be propelled with great force and cause
serious injury to occupants of the vehicle when the air bag inflates.
To reduce risk
• Pull by the plug rather than the cord when disconnecting the charger.
• Unplug the charger from the AC outlet before attempting any maintenance
or cleaning.
• Contact Retekess for assistance regarding repairs and service.
• The adapter shall be installed near the equipment and shall be easily
accessible
• Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
• Adapter shall be installed near the equipment and shall be easily accessible.
• The plug considered as disconnect device of adapter.
• The operating temperature of the EUT can’t exceed the specified range.
Approved Accessories
• This radio meets the RF exposure guidelines when used with the Retekess
accessories supplied or designated for the product. Use of other accessories
may not ensure compliance with the RF exposure guidelines and may
violate regulations.
• For a list of Retekess-approved accessories for your radio model, visit the
following website: http://www.Retekess.com
requirements, transmitter adjustments should be made only by or under the supervision
of a person certified as technically qualified to perform transmitter maintenance and
repairs in the private land mobile and fixed services as certified by an organization
representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized
by the local government radio management departments equipment authorization for
this radio could violate the rules.
FCC Requirements:
• This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not inst-
alled and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd
declares that the radio equipment type is in compliance with the essential requirements
and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive
2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of
conformity is available at the following internet address: www.retekess.com.
• Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging
reminds you that in the European Union, all electrical and electronic products,
batteries, and accumulators (rechargeable batteries) must be taken to designa-
ted collection locations at the end of their working life. Do not dispose of these
products as unsorted municipal waste. Dispose of them according to the laws
in your area.
IC Requirements:
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
RF Exposure Information
• DO NOT operate the radio without a proper antenna attached, as this may damage the
radio and may also cause you to exceed RF exposure limits. A proper antenna is the
antenna supplied with this radio by the manufacturer or an antenna specifically author-
ized by the manufacturer for use with this radio, and the antenna gain shall not exceed
the specified gain by the manufacturer declared.
• DO NOT transmit for more than 50% of total radio use time, more than 50% of the time
can cause RF exposure compliance requirements to be exceeded.
• During transmissions, your radio generates RF energy that can possibly cause interfe-
rence with other devices or systems. To avoid such interference, turn off the radio in
areas where signs are posted to do so.
• The device complies with RF specifications when the device used at 5mm from your
body. Third-party belt-clips, holsters, and similar accessories used by this device should
not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be avoided.
• DO NOT operate the transmitter in areas that are sensitive to electromagnetic
radiation such as hospitals, aircraft, and blasting sites.
WARNING
WARNING
WARNING
WARNING
4
5
6
EU Importer
：
Name
：
Germany Retevis Technology GmbH
Address
：
Uetzenacker 29,38176 wendeburg
Technical Parameter
Warnings
Warnings
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide
communications between two or more users over a distance. RF energy, which when
used improperly, can cause biological damage.
All Retekess radios are designed, manufactured, and tested to ensure they meet
government-established RF exposure levels. In addition, manufacturers also recommend
specific operating instructions to users of the radios. These instructions are important
because they inform users about RF energy exposure and provide simple procedures
on how to control it.
Please refer to the following websites for more information on what RF energy exposure
is and how to control your exposure to assure compliance with established RF exposure
limits: http://www.who.int/en/
Local Government Regulations
When radios are used as a consequence of employment, the Local Government
Regulations requires users to be fully aware of and able to control their exposure to
meet occupational requirements. Exposure awareness can be facilitated by the use of
a product label directing users to specific user awareness information. Your Retekess
radio has a RF Exposure Product Label. Also, your Retekess user manual, or separate
safety booklet includes information and operating instructions required to control your RF
exposure and to satisfy compliance requirements.
Radio License (if appropriate)
Governments keep the radios in classification, business radios operate on radio freque-
ncies that are regulated by the local radio management departments (FCC, ISED,
OFCOM, ANFR, BFTK, Bundesnetzagentur...).To transmit on these frequencies, you
are required to have a license issued by them. The detailed classification and the use of
your radios, please contact the local government radio management departments.
Use of this radio outside the country where it was intended to be distributed is subject to
government regulations and may be prohibited.
Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible for compliance
may void the user’s authority granted by the local government radio management depa-
rtments to operate this radio and should not be made. To comply with the corresponding
Before using this radio, read this guide which contains important
operating instructions for safe usage and RF energy awareness
and control for compliance with applicable standards and
regulations.
NO.
Item
Technical Parameter
Working voltage
Working current
Frequency Range
Frequency Stability
Frequency step
Environmental working TEMP
Output impedance
RF output power range
Harmonic/clutter radiation
Pre-emphasis
Audio distortion
Frequency response
Resolution
Enter the level
Modulation frequency deviation
SNR
Audio input connector
Size / weight
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
AC110V
～
230V 50Hz/60Hz
﹤
5A
87.5~108MHz
±10PPM
100KHz
-10
℃
~45
℃
50Ω
0W~25W±0.5dB
≤
－
65dB
50us,75us
0.3%
50Hz~15000Hz
≥35 dB
≤15 dBV
±75KHZ
70dB
RCA/USB Cable/TF Card
140*45*198mm Host Weight
:
1KG