background image

                   • When using the radio without a headset or earpiece, do not place

                     the radio's speaker directly against your ear

                   • Use careful with the earphone maybe possible excessive 

                     sound pressure from earphones and headphones can 

                     cause hearing loss

                   Note: Exposure to loud noises from any source for extended periods 

                   of time may temporarily or permanently affect your hearing. The 

                   louder the radio's volume, the less time is required before your 

                   hearing could be affected. Hearing damage from loud noise is 

                   sometimes undetectable at first and can have a cumulative effect.

Avoid Burns

 

                   Antennas

                   • Do not use any portable radio that has a damaged antenna. If a 

                     damaged antenna comes into contact with the skin when the radio 

                     is in use, a minor burn can result.

                   

Batteries (If appropriate)

                   • When the conductive material such as jewelry, keys or chains 

                     touch exposed terminals of the batteries, may complete an electrical 

                     circuit (short circuit the battery) and become hot to cause bodily 

                     injury such as burns. Exercise care in handling any battery, 

                     particularly when placing it inside a pocket, purse or other container

                     with metal objects

                 

  Long transmission

                   • When the transceiver is used for long transmissions, the radiator 

                     and chassis will become hot.

Safety Operation

 

                   Forbid

                   • Do not use charger outdoors or in moist environments, use only in

                     dry locations/conditions.

                   • Do not disassemble the charger, that may result in risk of electrical 

                     shock or fire.

                   • Do not operate the charger if it has been broken or damaged in any

                     way.

                   • Do not place a portable radio in the area over an air bag or in the 

                     air bag deployment area. The radio may be propelled with great 

                     force and cause serious injury to occupants of the vehicle when the

                     air bag inflates.

                   

To reduce risk

                   • Pull by the plug rather than the cord when disconnecting the charger.

                   • Unplug the charger from the AC outlet before attempting any 

                     maintenance or cleaning.

                   • Contact Retekess for assistance regarding repairs and service.

                   • The adapter shall be installed near the equipment and shall be 

                     easily accessible

                   • Risk of explosion if battery is replaced by an incorrect type. Dispose

                     of used batteries according to the instructions.

                   • Adapter shall be installed near the equipment and shall be easily 

                     accessible.

                   • The plug considered as disconnect device of adapter.

                   • The operating temperature of the EUT can’t exceed the specified 

                     range.

Approved Accessories

                   • This radio meets the RF exposure guidelines when used with the 

                     Retekess accessories supplied or designated for the product. Use

                     of other accessories may not ensure compliance with the RF 

                     exposure guidelines and may violate regulations.

                   • For a list of Retekess-approved accessories for your radio model, 

                     visit the following website: http://www.Retekess.com

interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

  receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CE Requirements: 

• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce 

  Co.,Ltd declares that the radio equipment type is in compliance with the essential

  requirements and other relevant provisions of RED Directive 2014/53/EU and the

  ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text 

  of the EU declaration of conformity is available at the following internet address:

  www.retekess.com.

• Disposal

  The crossed-out wheeled-bin symbol on your product, literature, or pack-

  aging reminds you that in the European Union, all electrical and electronic 

  products, batteries, and accumulators (rechargeable batteries) must be 

  taken to designated collection locations at the end of their working life. Do

  not dispose of these products as unsorted municipal waste. Dispose of them 

  according to the laws in your area. 

IC Requirements: 

Licence-exempt radio apparatus

This device contains licence-exempt transmitter(s)/receiver(s) that comply with 

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may 

     cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux ap-

pareils radio exempts de licence. L’exploitation est autorisée aux deux conditions 

suivantes:

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, 

     même si le brouillage est susceptible d’en compromettre le fonctionnement.

RF Exposure Information

• DO NOT operate the radio without a proper antenna attached, as this may 

  damage the radio and may also cause you to exceed RF exposure limits. A 

  proper antenna is the antenna supplied with this radio by the manufacturer or an

  antenna specifically authorized by the manufacturer for use with this radio, and 

  the antenna gain shall not exceed the specified gain by the manufacturer 

  declared.

• DO NOT transmit for more than 50% of total radio use time, more than 50% of

  the time can cause RF exposure compliance requirements to be exceeded.

• During transmissions, your radio generates RF energy that can possibly cause 

  interference with other devices or systems. To avoid such interference, turn off 

  the radio in areas where signs are posted to do so.

• The device complies with RF specifications when the device used at 5mm from 

  your body. Third-party belt-clips, holsters, and similar accessories used by this 

  device should not contain any metallic components. Body-worn accessories that

  do not meet these requirements may not comply with RF exposure requirements

  and should be avoided.

• DO NOT operate the transmitter in areas that are sensitive to electromagnetic 

  radiation such as hospitals, aircraft, and blasting sites. 

Avoid Choking Hazard

                   Small Parts. Not for children under 3 years.

Protect your hearing:

 

                   • Use the lowest volume necessary to do your job.

                   • Turn up the volume only if you are in noisy surroundings.

                   • Turn down the volume before adding headset or earpiece.

                   •  Limit the amount of time you use headsets or earpieces at high 

                      volume. 

WARNING

WARNING

WARNING

WARNING

4

5

6

EU Importer

Name

Germany Retevis Technology GmbH

Address

Uetzenacker 29,38176 wendeburg

 Warnings

This radio uses electromagnetic energy in the radio frequency (RF) spectrum to 

provide communications between two or more users over a distance. RF energy, 

which when used improperly, can cause biological damage. 

All Retekess radios are designed, manufactured, and tested to ensure they meet

government-established RF exposure levels. In addition, manufacturers also reco-

mmend specific operating instructions to users of the radios. These instructions 

are important because they inform users about RF energy exposure and provide 

simple procedures on how to control it.

Please refer to the following websites for more information on what RF energy 

exposure is and how to control your exposure to assure compliance with 

established RF exposure limits: http://www.who.int/en/

Local Government Regulations

When radios are used as a consequence of employment, the Local Government

Regulations requires users to be fully aware of and able to control their exposure 

to meet occupational requirements. Exposure awareness can be facilitated by the

use of a product label directing users to specific user awareness information. 

Your Retekess radio has a RF Exposure Product Label. Also, your Retekess user 

manual, or separate safety booklet includes information and operating instructions 

required to control your RFexposure and to satisfy compliance requirements.

Radio License (if appropriate)

Governments keep the radios in classification, business radios operate on radio 

frequencies that are regulated by the local radio management departments (FCC, 

ISED, OFCOM, ANFR, BFTK, Bundesnetzagentur...).To transmit on these 

frequencies, you are required to have a license issued by them. The detailed 

classification and the use of your radios, please contact the local government 

radio management departments. Use of this radio outside the country where it

was intended to be distributed is subject to government regulations and may be 

prohibited.

Unauthorized modification and adjustment

Changes or modifications not expressly approved by the party responsible for 

compliance may void the user’s authority granted by the local government radio 

management departments to operate this radio and should not be made. To 

comply with the corresponding requirements, transmitter adjustments should be 

made only by or under the supervision of a person certified as technically qualified

to perform transmitter maintenance and repairs in the private land mobile and 

fixed services as certified by an organization representative of the user of those 

services.

Replacement of any transmitter component (crystal, semiconductor, etc.) not 

authorized by the local government radio management departments equipment 

authorization for this radio could violate the rules.

FCC Requirements: 

• This device complies with part 15 of the FCC Rules. Operation is subject to the 

  following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that 

     may cause undesired operation.

• This equipment has been tested and found to comply with the limits for a Class 

  B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

  to provide reasonable protection against harmful interference in a residential 

  installation.

This equipment generates uses and can radiate radio frequency energy and, if 

not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that interf-

erence will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

Before using this radio, read this guide which contains important

operating instructions for safe usage and RF energy awareness

and control for compliance with applicable standards and 

regulations.

Отзывы: