awareness information. Your Retekess radio has a RF Exposure Product
Label. Also, your Retekess user manual, or separate safety booklet includes
information and operating instructions required to control your RF exposure
and to satisfy compliance requirements.
Radio License (if appropriate)
Governments keep the radios in classification, business radios operate on
radio frequencies that are regulated by the local radio management depart-
ments (FCC, ISED, OFCOM, ANFR, BFTK, Bundesnetzagentur...).To
transmit on these frequencies, you are required to have a license issued by
them. The detailed classification and the use of your radios, please contact
the local government radio management departments.
Use of this radio outside the country where it was intended to be distributed
is subject to government regulations and may be prohibited.
Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible
for compliance may void the user’s authority granted by the local government
radio management departments to operate this radio and should not be made.
To comply with the corresponding requirements, transmitter adjustments
should be made only by or under the supervision of a person certified as
technically qualified to perform transmitter maintenance and repairs in the
private land mobile and fixed services as certified by an organization
representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.)
not authorized by the local government radio management departments
equipment authorization for this radio could violate the rules.
FCC Requirements:
• This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause har-
mful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE Requirements:
• (Simple EU declaration of conformity) Henan Eshow Electronic Commerce
Co.,Ltd declares that the radio equipment type is in compliance with the
essential requirements and other relevant provisions of RED Directive
2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive
2012/19/EU; the full text of the EU declaration of conformity is available at
the following internet address: www.retekess.com.
• Disposal
The crossed-out wheeled-bin symbol on your product, literature, or
packaging reminds you that in the European Union, all electrical and
electronic products, batteries, and accumulators (rechargeable
batteries) must be taken to designated collection locations at the end
of their working life. Do not dispose of these products as unsorted municipal
waste. Dispose of them according to the laws in your area.
Specification
Restore factory value after power on
Plug the power in the box into the socket, and a small head on the other end of
the power supply is inserted into the DC hole of the main engine. Long press the
"SETUP" button in the standby state. Then the screen shows “F1” and press
“UP” button to “F2”, press "ENTER" once to make sure the host appears “0001”,
in which the bit of digital tube is flashing, and press "DOWN" button to make the
screen display as “0000”, then long press “CLEAR” button, at the same time, the
number on the screen is beating automatically, which means it is recovering
Factory value, the host screen is restored to standby state after cleaning.
Set the time F1
1. Long press “SETUP” button, the screen shows ‘’F1”
2. Short press “ENTER” button to shift, press “UP/DOWN” button to select
current time of year, month, day and week.
3. Press the “SETUP” button twice, and the host screen is restored to standby
state.
Caller registration number F2
1. When the host machine is in standby mode, long press the “SETUP” button,
and the host screen will display “F1”, then press “UP” button turn to “F2”
2. Press the "ENTER" button once, and the display screen will appear “0001”.
3. Use “UP/DOWN”and “ENTER” buttons shift to select the number of the bed
and room to register.
4. Press the call button for about one second, the number displayed on the
screen will automatically jump to the next one to register the next beeper.
5. If you need to set other Numbers, use the “UP/DOWN” and “ENTER” button
to shift to select the number to be registered.
6. After the code matching is completed, press the “SETUP” button twice to
return to the standby state.
Set the prompt music length F3
1. Long press the “SETUP” button to enter the setting menu, the screen
displays “F1”, then press the “UP” button to “F3”.
2. Press “ENTER” button, and use the “UP/DOWN” button to select the
prompt time from 00-99, if you set it as “00” which means mute with no
voice prompt.
Single delete caller
L
ong press the “SETUP” button to enter the setting menu, the screen displays
“F1”, then press the “UP” button to “F2”, press “ENTER” button, then use “UP/
DOWN” button to select the number you want to delete, press “CLEAR” button
to delete it.
Volume
When the host machine is in standby mode and displays time (year/month/
day), select "UP/DOWN" button to adjust the volume(0-10) available.
The volume cannot be adjusted If the calling information is displayed on the
screen, press the "CLEAR" button return to standby mode to adjust the
volume.
Set the loop display time F4
1. Long press the “SETUP” button to enter the setting menu. The screen
Displays “F1”, press the “UP” button to “F4”
2. Short press the “ENTER” button to enter sub-menu choice, use “UP/
DOWN” button to select the loop display time from 00 to 99.
3. After setting, press the “SETUP” button twice to return to the standby state.
Set auto clear time F5
1. Long press the”SETUP” button to enter the setting menu. The screen
displays “F1” Press the “UP” button to “F5”.
2. Short press the “ENTER” button to enter sub-menu choice, use “UP/
DOWN” button to set the time to clear automatically.
3. After setting, press the “SETUP” button twice to return to the standby state.
Set the prompt music F6
1. Long press the ”SETUP” button to enter the setting menu. The screen
displays “F1”. Press the “UP” button to “F6”
2. Short press the “ENTER” button to enter sub-menu to select the prompt
music from 0 to 3 by pressing “UP/DOWN” button.
3. After setting, press the “SETUP” button twice to return to the standby state.
Warnings
This radio uses electromagnetic energy in the radio frequency (RF) spectrum
to provide communications between two or more users over a distance. RF
energy, which when used improperly, can cause biological damage.
A
ll Retekess radios are designed, manufactured, and tested to ensure they
meet government-established RF exposure levels. In addition, manufacturers
also recommend specific operating instructions to users of the radios. These
instructions are important because they
inform users about RF energy
exposure and provide simple procedures
on how to control it.
Please refer to the following websites for
more information on what RF energy
exposure is and how to control your exposure to assure compliance with
established RF exposure limits: http://www.who.int/en/
Local Government Regulations
When radios are used as a consequence
of employment, the Local Govern-
ment Regulations requires users to be fully aware of and able to control their
exposure to meet occupational requirements. Exposure awareness can be
facilitated by the use of a product label directing users to specific user
Before using this radio, read this guide which contains
important operating instructions for safe usage and RF
energy awareness and control for compliance with
applicable standards and regulations.
1
2
3
Parameter Introduction
Specification
Display
LED tube
Button
SETUP, UP, DOWN, ENTER,
CLEAR
Volume
Adjustable
Digital-control
for 10 levels
Operation
conditions
Environmental temperature:
Degree 0-40
Relative humidity:
less than 80%
Times for
prompt tone 0-99 times
Partition
function
x xxx Bed
24/60 ports
Operation
frequency
433.92MHz
