suitable position between the waist.
2. Put the head on the head, adjust the microphone position, it is best to leave the mouth
in front of the 1-2CM, the other end of the head microphone 3.5 plug into the mainframe
microphone Jack;
Method of use
1. Take out the main machine in the package, fasten the round hole on both sides of the
back of the main machine with belt buckle, tie the main machine on the waist or hang
on the shoulder through the belt, can adjust the belt to let the main machine be in the
Operation mode
1. Sound Amplification
Turn the power on key to the "on" state. When you hear the sound of "ka", it means
that the power supply has been turned on. At this time, it means that the machine can
be used normally and inserted into the "microphone" socket caused by the standard
microphone of the local machine. The system automatically, by default, is in the state
of amplifying. Note: Under any function, press the "pause" button, and other functions
will stop, and the amplifying effect will be even better. If you turn it to the maximum
sound, the distance from the machine will be pulled away. It is recommended that the
distance between head and mouth is about 1 cm.
2. Mode key (M)
This key has the function of mode switching. When there is a U disk or TF card, you
can switch between the U disk / TF / FM / by pressing the long and short press mode
key. When there is no U disk or TF card, the mode key can be received by pressing
Description of FM Wireless microphone
1. First turn on the FM wireless microphone and set a frequency. The general recomme-
ndations are for frequencies such as 101.0, 108.0 and 87.5, and cannot overlap with
the frequency of local stations.
2. Then turn on the megaphone host and press M to switch to radio mode.
3. Long press the play / pause button to allow the host to search the station automatically.
4. When the host is finished, press one or the next key and switch to the same frequency
as the FM wireless microphone to begin amplifying
.
5. Next time you turn on the microphone directly and turn on the loudspeaker host switch
to radio mode. If you cannot connect it, you can repeat the 3.4 Steps. If the noise inte-
rference is serious, a transmission frequency can be reset on the wireless microphone,
starting from step 1.
* This page only applies to FM wireless machines, and does not mean that all machines
have this feature.
2
3
