12. Testing Your Fan.
11. Remote Control Operation.
HI
button - turns
fan
to HIGH speed
MED
button - turns
fan
to MEDIUM speed
LOW
button - turns
fan
to LOW speed
OFF
button - turns
fan
OFF
REV
button - used to REVERSE blade direction (fan must be
turned
low
before
reversing blade direction)
button - (for use with
optional light kit
,
sold
separately
)
controls light function: turns
light
ON/OFF
when tapped quickly; pressing and holding button down
for more than 0.7 seconds converts it into dimmer. Auto
resume capability keeps light at same brightness level as
the last time it was turned off.
It is recommended that you test fan before
finalizing installation. Restore power from circuit
box and light switch (if applicable). Locate
ON/OFF slider switch on wall control and set to
the ON position. Test fan speeds with the
different fan speed buttons. Next, locate remote
control and test fan speeds with different fan
speed buttons. If the remote control operates all
of the functions of the fan, battery has been
installed correctly. If the wall and/or remote
controls do (does) not operate all of the fan
functions, refer to "Troubleshooting" section to
solve any issues before contacting Customer
Service.
Fan
must
be on LOW
before
setting the fan to
reverse direction. Use REV button to recirculate
air depending on the season.
page 9
