STEP #8
TODDLER RAIL ASSEMBLY
Toddler Rail (x 2)
Page 13 of 13
Detail B
Metal hook on toddler rail
Stretcher bar
Loosen all tightened bolts
from near & far side frames.
Spread front of crib open
enough to get toddler rail
hooks between crib side
frames. Assemble toddler
rails to side frame on far
end by hooking into
provided slots while
aligning stretcher bar.
Assemble toddler rails to
side frame on near end by
hooking into provided slots
while aligning stretcher bar.
Retighten all bolts to snug
fit.
Hardware needed for Step #8:
(JJ) 1/2 in. Bolt (x 2 pieces)
(DD) Allen Wrench (1 piece)
(MM) Upper bushing screw (x 2 pieces)
Note: Remove (KK) top
bushings & (LL) bottom
studs.
Detail A
(JJ)
(JJ)
(MM)
(MM)
Stationary side
of crib
Drop side
of crib
Hardware Step # 8
(JJ)1/2 inch plug bolt (x 2 pieces)
(MM) Upper bushing screw (x 2 pieces)
(DD) Allen Wrench (1 piece)
Loosen end bolts
