Restomod Air BANTAM II, Инструкция по калибровке

Страница: 3 / 9

CALIBRATION:
Before we boxed and shipped your Control, we tested and
calibrated it to factory specifications to make sure it is capable of operating at
maximum efficiency. However, it must still be calibrated to your specific vehicle and
unit. This is an easy process that will only take a few minutes.
Page 3 866.784.4278 www.restomodair.com
Disconnecting the power (i.e. battery) will not cause your ECU to lose it’s
settings. AFTER CALIBRATING, REMOVE KEY AND STORE IN A SAFE, DRY
PLACE - ALONG WITH THIS PAGE. For real if your smart you will do this!
You need to read this
YOU CAN NOW CALIBRATE YOUR UNIT.
Follow the instructions
...As you follow thru these steps
you’ll be able to hear the motors working on your unit. If for
any reason your unit does not calibrate properly the first time,
just turn off the unit and rerun the setup process.
TEMPORARILY RECONNECT THE BATTERY AT THIS TIME.