RESSENCE TYPE 2, Руководство пользователя, Страница: 9 / 15

G E T T I N G S T A R T E D
You can use your TYPE 2 either with the help of electronics,
e-Crown
®
On , or without the help of electronics, e-Crown
®
Off .
e-Crown
®
Off
The TYPE 2 has a unique setting mechanism. Unlike traditional
watches, the TYPE 2 has no crown for winding or setting the
watch. The different actions normally carried out with a crown
are done by turning the caseback of the watch clockwise and/or
counterclockwise via the folding lever.
Important notice is to always turn slowly when winding or setting
(6 seconds to make one revolution). We recommend to first
manually wind the watch if necessary, then set the time.
1 . M A N UA L W I N D I N G
Turning the caseback clockwise (when looking at the caseback)
will wind the watch manually over a short section (30°). The
winding section starts when you feel a slightly stronger
resistance. A winding sound is perceptible when rotating over
the section followed by a “click” sound when leaving it. While
manually winding, the time will change accordingly. It is therefore
recommended to wind by slowly oscillating the caseback back
and forth over the winding section about twenty times. (like a slow
disc jockey would). Attention, sometimes when going over the
winding section you feel a blocking… Don’t force it , just try again.
P16 P17