IMPORTANT SAFETY INSTRUCTIONS
If you are not confident working with 12V/24V DC vehicle wiring, removing and reinstalling interior panels,
carpeting, dashboards or other components of your vehicle, contact the vehicles manufacturer, or consider
having the camera system professionally installed.
Do not attempt to open, modify or repair the product
Please read through the entire user manual before installation.
INSTALLATION
These instructions are only meant as a general guide due to the difference in vehicle makes and models. For
specific information, please contact your vehicles manufacturer.
Camera Installation
The camera can be tilted vertically to adjust the viewing angle. Make sure that its field of view is not
obstructed. There are several ways to mount the camera on the back of your car, but the most convenient
is to mount it near the license plate (as shown).
Please note: On some vehicles it may not be possible to mount the camera near the license plate. You may
have to find another spot at the back of your vehicle to mount it.
1.
Remove the rear license plate, and then loosen the bolts/screws of the license plate.
2.
Position the mounting plate of the camera behind the license plate bracket. Secure both license
plate bracket and mounting plate with the license plate bracket bolts/screws.
