4
SAFETY
AND INSTALLATION TIPS:
DVR
●
K
eep away from heat sources and high temperature places
●
A
void direct sunlight
●
A
void humid places
●
A
void vibration
●
Install in a v
entilated environment
Camer
a(s) and DVR
Do not a
ttempt to open the units with the power adaptor plug connected to avoid any risk
of personal injury.
When installing CCTV camera(s), always follow manufacturer’s advice when using power
tools, steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles) when
drilling holes. Before drilling holes through walls check for hidden electricity cables and
water pipes. The use of a cable/pipe detector is advisable.
When installing any cameras with this unit, it is advisable to use cable conduit to protect any
video / power extension cables from being exposed externally and to prevent/reduce the
chances of the cables being tampered with. After drilling any hole though an external wall
for a cable, ensure the hole is sealed up around the cable using a sealant to prevent drafts.
To prevent a fire or electrical shock hazard, do not attempt to open the housing while the
unit is exposed to rain, water or wet conditions. There are no user serviceable parts
inside. Refer servicing to qualified service personnel.
NIGHT
VISION:
T
he camera has built-in infra-red LEDs to allow you to view at night for 24hrs
surveillance. The LEDs will automatically activate at night and the picture viewed will
turn to black and white.
