11
- dense materials such as concrete or metal will impede the wireless signal; move the
camera and/or receiver away from dense materials. A metal radiator is an example.
- if possible keep the camera and receiver away from or move conflicting devices such
as wireless routers, microwaves, cordless phones.
- make sure all Cameras are set to different channels.
- disconnect all other wireless devices to find out which is causing the problem and
adjust your setup accordingly.
- some wireless signals may originate from nearby homes or businesses; in this case a
wired camera may be necessary.
- if using the wireless camera kit with a DVR which is set to motion record, ensure that
the best possible reception can be viewed from the wireless camera. If necessary
move the camera closer to the receiver to prevent any interference from being viewed.
Interference will cause the DVR to trigger and record the interference unnecessarily.
