Response CA11, Руководство по установке, Страница: 2 / 6

2
INTR ODUCTION
Section 1
T he Response Dummy Heavy Duty Camera is a non functioning unit, although it is
identical in appearance to the Response Wired Heavy Duty Camera (CA10). It is intended
for use as a visual deterrent to assist in the protection of your home, office, etc. The
dummy camera is easily mounted on the wall using the supplied mounting bracket.
SAFETY AND INSTALLATION TIPS:
W hen installing any CCTV camera(s), always follow manufacturer’s advice when using
power tools, steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles)
when drilling holes. Before drilling holes through walls check for hidden electricity cables
and water pipes. The use of a cable/pipe detector is advisable.
KIT CONTENTS
Section 2
1 x Dummy Heavy Duty Camera
1 x Camera fixings kit - wall plugs and screws
4 x Ø 3.5mm x 27mm screws and 4 x No.8, 28mm wall plugs
are supplied for the wall bracket.
1 x Installation manual
1 x Window sticker
T ools Required:
Electric drill
5mm masonry drill bit
No. 2 Philips screwdriver
3mm flat blade screwdriver
Please r ead before you start:
Al ways use discretion when installing CCTV surveillance equipment especially
when there is perceived policy. Enquire regarding local regulations applicable
to the lawful installation of video recording / surveillance. Third party consent
may be required.