Respironics REMstar Pro Скачать руководство пользователя страница 28

Страница: 28 / 64

3-6

REM

STAR

M S

ERIES

SER

ANUAL

3. Plug the power supply cord’s connector into the power inlet on the back of the device, as

shown in Figure 3–6.

IGURE

3–6 C

ONNECTING

THE

OWER

UPPLY

ORD

THE

EVICE

4. Ensure that all connections are secure.

Important!

To remove AC power, disconnect the power supply cord from the elec-
trical outlet.

Warning:

Inspect the power cord often for any signs of damage. Replace a dam-
aged power cord immediately.

3.4.2 U

SING

DC P

OWER

The Respironics DC Power Cord (Reorder Number 1001956) can be used to operate this device

in a stationary recreational vehicle, boat, or motor home. The Respironics DC Battery Adapter

Cable (Reorder Number 532209), when used with the DC Power Cord, enables the device to be

operated from a 12 VDC free-standing battery.

Caution:

When DC power is obtained from a vehicle battery, the device should not

be used while the vehicle’s engine is running. Damage to the vehicle or the
device may occur.

Caution:

Only use a Respironics DC Power Cord and Battery Adapter Cable. Use of

any other system may cause damage to the device or vehicle.

Refer to the instructions supplied with the DC Power Cord and adapter cable for information on

how to operate the device using DC power.

Содержание REMstar Pro

































































Результаты поиска

Содержание REMstar Pro

Отзывы:

Respironics REMstar Pro, Руководство пользователя, Страница: 28 / 64

Результаты поиска

Содержание REMstar Pro

Отзывы: