24
User Manual
Chapter 6: Operating the Device
This chapter explains how to start the device and change the settings.
6.1 Starting the BiPAP S/T
1. Plug in the device to an AC or DC power source to power up the
unit. A confirmation alarm sounds, and the control pad buttons light
up.
NOTE:
If the alarm does not sound or the buttons do not light up, the
device requires servicing. Contact your home care
provider.
Several screens appear initially during this step:
a. The first screen that appears is the Self Test screen, shown in
Figure 6–1. This is the internal test performed by the device.
Figure 6–1 Self Test Screen
b. The next screen displays the software version, as shown in
Figure 6–2:
Figure 6–2 Software Version Screen
NOTE:
Version 1.0 shown in Figure 6–2 is an example. Your device
may have a higher software version installed.
