en-28
- Fix the bottom chimney mounting plate, (5.12) to the
wall with two 4x35mm countersunk screws
- Fix the base of the bottom chimney with two 4x8mm
countersunk screws on the sides of the hood.
Fig. 5.15
- Secure the mounting bracket with two 4x8mm
countersunk screws.
Fig. 5.16
- Lift the front of the hood, remove the grease filter
and secure the hood from the interior using two
4x35mm countersunk screws through the 2 holes in
the hood rear panel.
- Fit the charcoal filters at the sides of the motor.
Fig. 5.17
