Installation
2.4.5.2
Cable Bend Radius
IMPORTANT
The Sonar Head to Processor cable can be damaged by a tight bend. Use a
minimum bend RADIUS of 150 mm (6 in) or a minimum bend DIAMETER of 300
mm (12 in) for this cable.
Figure 9, Cable Schematics
Figure 9 has been provided to assist the installer in the event that this cable, or
one of its connectors, has been damaged. See Chapter 9, engineering drawings
10483 (Unshielded) or 11125 (Shielded) for additional information on this cable
assembly.
2.4.5.3 Cable
Length
The standard, off-the-shelf, length of the Sonar Head to Processor cable is 25
meters. This length can be increased to a maximum of 150 meters by making
compensating circuit adjustments in the Sonar Processor. For information on
non-standard length cables, contact RESON Engineering.
______________________________________________________________________
SeaBat 8101 Operator's Manual
2-6
Version 3.02