Reson SeaBat 7125 SV2 Скачать руководство пользователя страница 28

Страница: 28 / 212

SYSTEM STARTUP AND SHUTDOWN

SeaBat 7125 SV2 Operator‟s Manual

Page 12

July 25, 2011

Version 3

SYSTEM STARTUP AND SHUTDOWN

3.1 Chapter Overview

This chapter includes detailed instructions on the following subjects (click the
emphasized hyperlink to be taken to the section):

System Startup Instructions:

Consists of startup details.

Starting the 7k Control Center and Sonar

Consists of a description of the

options available for setting up the sonar system for operation.

System Shutdown Instructions

Consists of details on stopping the system.

Installing a License:

Consists of details on installing a license file.

NOTE

For information on configuration of the system (including I/O
module configuration, remote operation, and folder
management), see

section 4 System Configuration

For information on the user interface and operation of the
system, see

section 5 System Operation.

For information on the practical use of the sonar, see

section 6

Active Sonar Usage.

3.2 System Startup Instructions

After the SeaBat hardware has been installed (see

Appendix C Installation Instructions

the system may be started. To do this, press the power buttons on both the transceiver
and the color monitor.

NOTE

The transceiver power button will be red, when power is connected to the unit; it will
turn blue, when the system is turned on.

The transceiver will power up and boot directly into Windows. No user name or
password is required for standard systems.

NOTE

In the unlikely event that the system is hanging, press the power button on the
transceiver for 10 seconds to shut down the system.

Содержание SeaBat 7125 SV2





















































































































































































































Результаты поиска

Содержание SeaBat 7125 SV2

Отзывы:

Похожие инструкции для SeaBat 7125 SV2

Бренды по названию

Популярные бренды

Reson SeaBat 7125 SV2, Руководство оператора

Результаты поиска

Содержание SeaBat 7125 SV2

Отзывы:

Похожие инструкции для SeaBat 7125 SV2

Бренды по названию

Популярные бренды