From all of us at Resolution Audio, thank you for choosing the Opus 21 CD player. We went to great lengths to
design and produce a compact disc player that offers musical pleasure and superior performance.
Unpacking
After unpacking your Opus 21 CD player, inspect it for any shipping damage and contact us immediately
if any is found. Do not plug the power supply into any outlet if you find any shipping damage.
Please keep all packing materials for future transport of your player. Shipping the Opus 21 in anything
other than its original crate may result in damage that is not covered by warranty. If you require
a replacement crate or packing materials, please contact Resolution Audio.
Should you need to repack the player, be certain to place the power centre on the bottom, the player
in the middle, and the accessory box on top, with foam sheets beneath each piece.
The accessory box contains the following items:
AC power cord
Remote control
(2) AAA batteries
OpusLink interconnect cable
To install the batteries in the remote control, open the cover on the back of the remote. Insert the batteries in
the orientation shown in the compartment, and replace the cover.
Installation
Locate the Opus 21 CD player and Power Centre on your shelf.
While the cd player can be stacked directly above or below the power centre, we recommend that separate
shelves be used for optimum performance. Alternatively, the components may be placed side-by-side on a
single shelf.
Turn off any associated components prior to connecting the Opus 21.
This minimizes the chance of momentary electrical surges disturbing your system.
Connect the OpusLink interconnect to both the CD player and Power Centre.
Note that the cable can only be installed in one direction. Be sure to secure the connectors by hand-tightening
the integral screws.
