8
PRESET STORE
This button is used to store stations in the preset memory. To save a new preset, the
tuner must be in SEEK mode. Tune the desired station using the STATION DOWN / UP
buttons or the PREVIOUS / NEXT FREQUENCY buttons on the remote control. Press
store once, and the display will indicate (flashing) the next available preset. This can be
changed using STATION DOWN / UP to overwrite existing presets. Once the desired
preset number is chosen, press store again and the preset is saved. The tuner returns
to SEEK mode. If the store or up/down buttons are not pressed within 10 seconds,
the store action is cancelled. Pressing BAND or TUNE will also cancel the store operation.
The maximum number of presets available are 80 (FM), 30 (AM / MW), 6 (LW).
Preset memory may be cleared in Setup mode (see below.)
9
HEADPHONE
The XS headphone amplifier provides output of any of the XS sources plus CD playback.
If present, your Opus 21 series amplifer will automatically be muted when headphones
are plugged in.
7
6
STATION DOWN / UP
In SEEK mode, the next station will be found. The tuner will automatically wrap around
the ends of the band. To stop seeking the next station, press this button again.
In PRESET mode, the next preset station will be selected. Holding one of the buttons will
rapidly advance through the preset stations.
5
TUNING MODE
This button toggles the tuning mode between SEEK and PRESET.
SEEK mode is indicated by the band name (`FM´) next to the station frequency.
PRESET mode is indicated by the preset number.
If no presets are available in the current band, there is no change.
If the tuner was not the active source, Tune will also select the tuner.
4
TUNER BAND
Pressing this button selects the tuner. Successive presses will change
the tuner band in following sequence:
FM AM (North America and countries without LW)
FM MW LW (Europe)
Band
Tune
Store
