RE601 Series CryptiX
™
Door Window Sensor
CryptiX Door Window Sensor
is a full-featured security
transmitter with industry-leading wireless range and battery
life. It is typically used to sense opening and closing of
doors and windows, but can secure just about anything using
its two external contact zones. It will alarm when the magnet
is pulled away from the sensor or when an external contact is
opened.
Features
• Industry-leading wireless range and battery life
• One door window zone and two external contact zones
• Secure encrypted wireless transmissions
• 5 year warranty
Enroll
by placing the panel into wireless enrollment mode
and then sending an enrollment signal from the sensor.
Alternatively, the sensor can be enrolled by scanning its bar
code using the HeliLink app or by entering its 8-character
serial number on the interactive service provider’s web portal.
Options for sending an Enrollment Signal
• Remove the battery tab, OR
• Remove the cover to trip tamper
Install
by mounting the sensor and magnet on a door or
window using the mounting screw locations. Make sure to
align the alignment marks on the sensor and magnet when
mounting. Additionally, the sensor can be used with up to
two external contacts.
External Contacts
(
not evaluated by ETL
)
• Use
normally-closed
contacts because the door
window sensor will transmit an alarm when it
sees an external contact
open
.
• Do not use end-of-line resistors.
• Wire contact wires to one or both outside
terminals, using the center terminal as
common.
CE installations must use a cover-securing screw.
Mounting Screw Holes
Cover-Securing Screw Hole
Use the Helix installation guide to verify proper system setup.
IN
STALL
G
U I D E
I
