Resol WMZ Plus, Руководство по установке и эксплуатации, Страница: 9 / 24

9
en
2.4 MicroSD card slot
The device is equipped with a MicroSD card slot.
With a MicroSD card, the following functions can be carried out:
• Store measurement and balance values onto the MicroSD card. After the trans-
fer to a computer, the values can be opened and visualised, e.g. in a spreadsheet.
• Store adjustments and parameterisations on the MicroSD card and, if necessary,
retrieve them from there.
• Download firmware
updates
from the Internet and install them on the device via
MicroSD card.
MicroSD card slot
A MicroSD card is not included, but can be purchased from the manufacturer.
Note
For more information about using a MicroSD card, see page 19.
3 Operation and function
3.1 Buttons and adjustment dial
The device is operated via 2 buttons and 1 adjustment dial (Lightwheel ® ) below
the display:
Left button (
⟲
) - escape button for changing into the previous menu
Right button(
✓
) - confirming / selecting
Lightwheel ® - scrolling upwards / scrolling downwards, increasing adjust-
ment values / reducing adjustment values
3.2 Control lamp
The device is equipped with a multicolour LED in the centre of the Lightwheel ® ,
indicating the following states:
Colour Permanently shown Flashing
Green
Everything OK
Red
Sensor line break, sensor short circuit
Yellow
Parameterisation active, update in progress,
MicroSD card writing error