© RESOL 10263 flo
wcon_sensor
.monen.ind
d
F lo w C o n S e n s o r / S e n s o r H E
25
|
0077
Code input:
Î
Scroll down to “User code” in the adjustment value
menu
Î
Press button 3 to confirm
The entry mask for the user code appears. A triangle
marks the active digit.
Î
Adjust the desired number by pressing buttons 1 and 2
Î
Press button 3 to confirm
The triangle switches to the next digit.
The expert user code is:
0077
After the fourth digit has been entered and confirmed, the
display switches back to the adjustment value menu. If the
correct code has been entered, it is possible to scroll down
into the expert area.
If no or a wrong code has been entered, the display swit-
ches back to the adjustment value menu.
Expert user code
Collapsible submenus
The expert area of the adjustment value menu consists
of collapsible submenus. These are marked by a
+
to the
left of the menu line. If a collapsible submenu is selected,
it opens up. The menu line is then marked by a
–
instead
of a
+
.
If the menu line is selected again, the collapsible submenu
closes again. Thus, it is possible to keep the viewable menu
range uncomplicated and well-arranged.
The following submenus are accessible from the expert
area:
• Control values
• Speed control
• Heat qty. measurement
• Volume adaptation
• Country parameters
• System parameters
• Function control
In the following, the individual menus and their functions
are explained.
Adjustment values
-- Expert --
Control values
Readiness
–
x
Note:
The adjustment values in the expert area should
only be altered by qualified personnel. Other-
wise, the system may not function faultlessly!
In order to access all adjustment values, the expert area of
the adjustment menu has to be activated.
Upon delivery, the expert area of the
D e lt a S o l
S e n s o r / S e n s o r H E
controller menu is already
activated.
If the expert area has been deactivated, the expert user
code has to be entered again. (see chap. 13.1):
If the system user shall not be able to access the expert
area after the pump station has been successfully commis-
sioned, it can be deactivated by entering and confirming an
incorrect user code (e. g. “0000”).
