background image

17

General Warnings and Cautions

En

gli

sh

Note:

 At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration 

varies, depending on the pressure settings, patient breathing pattern, mask, point of 
application and leak rate.

Do not use the S8 Auto 25 if there are obvious external defects or unexplained changes 
in performance.

Do not open the S8 case. There are no user serviceable parts inside. Repairs and internal 
servicing should only be performed by an authorised service agent.

Explosion hazard—do not use in the vicinity of flammable anesthetics.

!

Cautions

At low pressures, the flow through the exhalation ports of your mask may not clear all 
exhaled gas from the tubing. Some rebreathing may occur.

The airflow for breathing produced by this device can be as much as 11ºF (6ºC) higher 
than the temperature of the room. Caution should be exercised if the room temperature 
is warmer than 90ºF (32ºC).

When AC mains power (100–240V AC) is not available, always use a ResMed DC/DC 
Converter 24V/50W. (The DC/DC Converter 24V/50W is available as an optional 
accessory. It is not supplied with all models.)

Note: 

The above are general warnings and cautions. Specific warnings, cautions and 

notes appear with the relevant instructions in the manual.

 

Содержание Positive AirwAy Pressure Device S8 Auto 25
























Отзывы: