ResMed Nox A1 Скачать руководство пользователя страница 39

Страница: 39 / 62

Clean the devices (recorder and oximeter) and the accessories between each patient according to the procedure below.

Effort belts and nasal cannula are single use and must be changed between each patient

Clean devices and accessories

The use of any other cleaning agent, especially ammonium chloride, is strongly discouraged as there is a high risk it will shorten the lifespan of

the device and its accessories.

Procedure

Nox A1

To disinfect the different components, the following cleaning agents can be used:

• 70-90% isopropanol

• Super Sani-Cloth Plus disinfection wipes

• Sodium hypochlorite diluted with water at 1:500 (bleach)

Clean these elements with a soft cloth dampened with hospital grade cleaner that is not corrosive to plastic

or metal. Do not pour or spray any liquids onto the device, and do not allow any liquids to enter any openings

on the device. Do not immerse the cables in liquid and avoid contact between the cleaning agent and the

connectors.

Abdomen

cable

EKG/PLM

cable

EEG head

cable

EEG lead

Clean the gold cup electrode cables with alcohol free soap. A toothbrush can be used to scrub the cups to

remove paste and debris. Be careful not to scrub too aggressively to avoid damaging the gold plating.

Oximeter

3150

Wipe the device with a soft cloth dampened with a 10% bleach / 90% water solution (household bleach

[containing less than 10% sodium hypochlorite]). Do not use undiluted bleach or any cleaning agent other than

those recommended here, as permanent damage could result.

SpO

sensor

Unplug the probe from the pulse oximeter before cleaning. To clean the probe, wipe all patient contact

surfaces with a soft cloth dampened with a mild detergent, isopropyl alcohol, or a 10% bleach / 90% water

solution (household bleach [containing less than 10% sodium hypochlorite]).

Do not sterilise in an autoclave or immerse the sensor in liquid of any kind. Do not pour or spray any liquids

onto the sensor. Do not use caustic or abrasive cleaning agents on the sensor. Do not use cleaning agents

containing ammonium chloride. Use of these chemicals may shorten the life of the product.

Содержание Nox A1































































Результаты поиска

Содержание Nox A1

Отзывы:

Бренды по названию

Популярные бренды

ResMed Nox A1, Как пользоваться инструкцией

Результаты поиска

Содержание Nox A1

Отзывы:

Бренды по названию

Популярные бренды