Read your entire Lumis
™
User Guide before use.
Setup
1
2
a
b
With the device on a stable level surface,
grip the retention clip on the back of the
device and pull up to open.
Note: The retention clip is shown in the open
position.
(a) Plug the power connector into the device
power inlet then (b) push down the retention
clip to secure in place.
Connect one end of the power cord into the
power supply unit and the other end into the
power outlet.
3
4
Connect the air tubing firmly to the air outlet
located on the rear of the device.
Connect the free end of the air tubing firmly
onto the assembled mask. Press Start/Stop
to begin therapy.
Lumis with HumidAir
If you have a Lumis device with HumidAir™, fill the humidifier as follows:
1
2
Open the humidifier and fill with water up to
the maximum water level mark.
Close the humidifier and insert it into the
side of the device.
Heated humidification offers relief from dryness and congestion and is designed to make therapy
more comfortable.
