A. Power off
First make sure the power is
turned off!
To ensure your safety, always make sure mains power is switched OFF before accessing wiring.
Before removing the old thermostat
take a picture of the old thermostat’s wiring as
a reference then proceed to installation.
The T6RWP thermostat should not be placed near draughts, in direct sunlight or near heat sources. It should be at least 1.2 -
1.5 meters from the floor.
Needed during installation:
•
Wall box with minimum depth of 40 mm and with 230V cabling (neutral
and line)
•
An installed Receiver Box (single or 2-channel version)
C. Wall plate
Using a screwdriver open wall plate
terminal cover to connect wires.
B. Power module
Connect the 230V power wires to the
power module.
D. Wiring wall plate
E. Place thermostat
F. Power on
Turn power back on
7
