Residentia Slimline DW4CS, Руководство пользователя

Страница: 7 / 24

User Manual
\
07
It’s important to carefully read the following installation instructions before beginning the installation of your dishwasher.
Important!
The installation of the pipes and electrical outlets should
be completed by suitably licensed and qualified persons.
Positioning
The installation position of the dishwasher should be near the existing inlet,
drainage wastepipe and power outlet.
— Choose a position near your sink to facilitate the installation of inlet and
drain hoses (refer to figure one).
— If the dishwasher is installed in the corner of your kitchen cabinetry, make
sure an allowance is made to ensure your dishwasher door can freely open
without obstruction from other cabinetry/door handles.
— The dishwasher back should rest against the wall behind, whilst the sides
should rest against the adjacent cabinets or walls.
— The dishwasher is equipped with water supply and drain hoses that can be
positioned either to the right or left hand sides, dependent on your required
installation.
— As per the diagram (left), ensure that when you are installing your
dishwasher in a corner situation, adequate space is left to allow the door to
open without hitting other cabinetry or handles.
Drain Hose Connection
Insert the drain hose into a drain pipe with a minimum diarmeter of 40mm, or connect it onto the trap of your sink
where a dishwasher connection is present.
Important! The top of the hose must be less than 1000mm high, as
illustrated below.
Installation Instructions
\