Residentia RUM52, Руководство пользователя

Страница: 9 / 16

User Manual
\
09
By ensuring proper cleaning and maintenance of your Residentia
rangehood, you can ensure that it will have a long and fault free operation.
Cleaning the grease filters Keeping this filter clean will keep the rangehood extraction performance at an
optimum. Please strictly follow the guidelines below.
– The grease filter mesh is made of high-density stainless steel. Please
ensure you never use a corrosive detergent during cleaning.
– Method 1: Put the mesh into 40-50°C clean water with a small amount of
regular dishwashing liquid, and soak for 2-3 mins. Wear gloves and clean
with a soft brush. Please do not apply too much pressure, as the mesh is
delicate and will damage easy.
– Method 2: You can wash your rangehood grease filters in your dishwasher,
however please ensure they aren’t washed at a temperature above 60°C
degrees.
Cleaning the cooker hood To protect the main body of your rangehood from corrosion or stains, the
cooker hood should be cleaned with hot water with a non-corrosive detergent
every two months. For stubborn stains or marks, you can try using a specific
stainless steel cleaner available from most supermarkets.
Warning! Please do not use a corrosive detergent, or abrasive
clothes, as it will damage the body.
– Keep the motor and other spare parts free from water, as this will cause
damage to the appliance.
– Before cleaning the rangehood, always switch the power off at the outlet
and unplug the rangehood.
– If your rangehood has a damaged plug or cord, please ensure your
rangehood remains unplugged and contact the Residentia Support team
for further assistance. Any electrical work should only be completed by a
suitably licenced and authorised person.
–
If you’re using a carb on fil ter, it shou l d never be exposed to heat.
Changing a LED Lamp
In the event of LED Lamp
-Disconnect the rangehood from the power supply
-Unplug and press the lamp cover outward and take out the lamp
-Replace the lamp and plug again
Optional carbon filter (optional) An optional carbon filter can be purchased separately and installed in your
undermount rangehood. Normally the activated carbon filter should be changed
every three to six months according to your volume of cooking. Activated
carbon filter cannot be washed or recycled. The installation procedure of
activated carbon filter is as below.
– Remove the grease filters.
– Insert the first activated carbon filter into the unit and turn it in anti-
clockwise direction. Then repeat the same on the other side.
– Re-insert the grease filters.
Note: When the activated carbon filter installed, the suction
power will be lowered.
Cleaning & Maintenance
\