RL-BT100
INSTALLATION MANUAL
linx-Audio
Bluetooth
®
Range
Bluetooth
In-Ceiling Amplifier
www.resi-linx.com
®
resi-linx
Audio Wiring Diagram
WARRANTY
Australian Audio Imports Pty Ltd states that the warrant that the customer can rely on is that provided
by the manufacturer. In the event of any warranty claim please contact us and we will forward it to the
manufacturer. The manufacturer will then determine the extent of their liability. This expressly negates, to
the extent possible by Australian law, any warranty reliance on Australian Audio Imports Pty Ltd.
Australian Audio Imports Pty Ltd
ABN: 34 005 281
All trademarks and trade names are those of their respective owners. The
Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Australian Audio Imports Pty Ltd is under license.
Australian Audio Imports
* The communication range quoted is calculated based on an unobstructed line of sight test under
optimum conditions. Actual range will vary depending on conditions, and is often less than the maximum
possible. Your actual range will be limited by several factors including, but not limited to, electromagnetic
interference and obstructions.
Troubleshooting
My music is not coming out of the stereo speakers:
•
Ensure RL-BT100 settings are set correctly eg. volume level, bass and treble adjustment.
•
Ensure the volume on your
iPad, iPhone, iPod touch or other
Bluetooth
enabled device is set to a suitable level.
•
Ensure the
Bluetooth
In-Ceiling Amplifier is powered and the power LED on the TIM module is lit to green.
•
Ensure the blue LED on your
TIM module
is flashing slowly indicating your device is connected via
Bluetooth
technology.
•
Ensure all connections are correct and firmly connected to the RL-BT100.
•
Ensure your iPad, iPhone, iPod touch or other
Bluetooth
enabled device is within the 25m* range of the Amplifier.
Music Suddenly Stops playing:
•
Ensure your
Bluetooth
device is within the 25m* range of the Amplifier.
•
RL-BT100 may cut out if Audio overloads to protect the Amplifier. Turn off RL-BT100 via remote control and wait 5 seconds for
the system to reset then turn the unit back on and adjust your audio to a more suitable level.
*
EIA/TIA 568A Wiring Standard Pin Wire Colour
1 White w/
Green
Stripe
2
Green
3 White w/
Orange
Stripe
4
Blue
5 White w/
Blue
Stripe
6
Orange
7 White w/
Brown
Stripe
8
Brown
EIA
568A
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures
MASTER
RL-BT100
SLAVE
RL-BT100
TIM
Target Indicator
Module
RL-BT430
Input Module for
Bluetooth System
