manualshive.com logo in svg

resi-linx digi-MOD RL-DM8000, Руководство пользователя

Поделиться
Скачать
resi-linx digi-MOD RL-DM8000 Скачать руководство пользователя страница 9

RL-DM8000 User Guide and Install Manual

Page 9

ADMINISTRATION PAGE FUNCTIONS

ACTIONS

Reboot

Reboot device. All unsaved settings will be lost.

Reset to Default

Reset all settings back to original factory settings

Backup

Download all settings of device

Upload

Upload a saved config file

New Password

Create and save new password for GUI 

IMPORTANT NOTE:

We highly recommend you save your encoder 

configuration files. Simply Click the “Backup” button 

and the config files will be saved to your computer. 

NOTE:

When setting a new password 

you must use the ‘Submit’ button. 

To upload a configuration file- simply click “Choose File” then 

locate the file you want to upload. Click “Upload” to install the 

configuration files. This function is helpful to the installer when 

installing a large number of encoders in a single system.  

Saving your configuration files

STEP 13

: If required, change GUI Password and Submit.

This password is for access to the GUI only. The LCD front Panel Password will 

 

not be changed and is set to prevent unauthorized users access to your device.

STEP 11:

 Administration

Содержание digi-MOD RL-DM8000

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды